Search Criteria
Products meeting the search criteria
Model: KY03-012BK
Description:Medium stiffnes T-Plates for use with Kyosho's MR03 or MR04, set of three meaning you will have spares. ..
Model: KY03-011GD
Description: Lower the center of gravity of your Kyosho MR03 chassis with these brass pieces to add stability and reduce the chance of traction roll!..
Model: MT-0041
Description:Brushless sensor-less motor for Mini-z and any other 1/28 sized micro racers! Features large air ventilation holes to keep with keeping temperatures cool! Four different set of mounting holes allows for you to shift the wiring to allow for ease of mounting. D shaped cut motor shaft for u..
Model: KY03-001BK
Description:Aluminum 7075 lightweight and high strength motor mount for use with Kyosho's MR03/02. Features simple and minute height adjustment with spacer shims to get the perfect ride height! Includes D slot and Circular motor mounting for use with both Kyosho and standard brushless motors. Includ..
Model: KY03-007BK
Description:Replace the entire lower suspension mount of your MR03 with this aluminum and brass upgrade set! Brass rear piece to lower center of gravity for a more docile handling car...
Model: KY03-004BK
Description:Aluminum steering rods with different toe in angles for you to fine tune your car, with etched degrees on the item for you to tell the angles apart...
Model: KY03-005BK
Description:Aluminum upper arms for your Kyosho MR03, with inbuilt camber. Etched markings to differentiate which different camber angles...
Model: KY03-006BK
Description:Aluminum upper arms for your Kyosho MR03, with inbuilt camber. Etched markings to differentiate which different camber angles...
Model: KY03-008BK
Description:Aluminum steering knuckles with the axle..
Model: YT-0222BK
Description:Multifunctional car stand for working on your Mini-Z or any 1/28 scale micro rc car. In-Built holes to hold diffs when rebuilding and pre marked areas for measuring the diameter of your tires...
Model: KY03-009BK
Description:Aluminum spring mount to prevent deformation when compared to the stock part, included shims to adjust spring preload. For use with either narrow or wide front suspension by using the corresponding mount...
Model: KYMR-001DB
Middle mount motor for specially designed for using 90mm wheelbase bodies on your Kyosho MR03 and MR04 Mini-Z! Strategically placed motor to allow for plenty of pod movement for increasing stability. Also included is a brass plate mounted at the bottom of the motor to reduce the chance of flipping o..
Model: YT-0217BK
Description:Organize your pit table neatly with this Mini-Z Multi Function Tool Stand! House not only your tools, but also your tires, batteries, and more! Featuring a magnetic compartment for you to stick body clips to it...
Model: KY03-013GD
Description:Lower the center of gravity of your Kyosho MR03 chassis with these brass pieces to add stability and reduce the chance of traction roll!..
Model: YT-0221BK
Description:Graphite setup board for Mini-Z or other micro scale rc cars. Reinforced underside with aluminum rails to keep things flat and three different compartments for you to store small parts. The most right side compartment is also magnetised so that your screws and other small parts stay in p..
Model: LK-0036
Description:LED Light kit for Kyosho's Mini-Z MX-01, plugs into the ICS port to get power without having to fiddle with the power ports...
Model: LK-0035
Description:This RC car light system is in very good quality with durable wires, easy to install and MCU controlled main control board. LED patterns are controlled with a small attached button, with 5 different operating modes!..
Model: YT-0210
Description:Toolset including all the tools that you would require to rebuild your entire car! Comes in a neat carrying pouch for you to bring to the track easily and prevent your tools from getting scratched or scratching other things!..
Model: WL-0159WH
Description:Get all the off-set wheels you would need for running your Mini-Z or other 1/28 Micro R/C car which uses the Kyosho mounting hole! RWD mounting pattern..
Model: WL-0160WH
Description:Get all the off-set wheels you would need for running your Mini-Z or other 1/28 Micro R/C car which uses the Kyosho mounting hole! RWD mounting pattern..
Model: YE-0032
Description:High discharge rate AAA batteries for Mini-Z Competition or use these high capacity batteries for your transmitter or receiver packs!..
Model: YBS-0027
DescriptionReplace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!..
Showing 1 to 26 of 26 (1 Pages)