Body Tools, Camber Gauge, Car Stand, Chassis Gauge, Damper & Shock Tools, Hex Wrench, Nut river, replacement tips, set up tools, turnbuckle turner & more. All by Yeah Racing!
Model: YT-0196
Description Drill bits for installing into a handheld drill or a dremel for use to either modify shock pistons or places where small holes are needed! Color coded with corresponding sizes for easy management. Comes with 10pcs, increasing in 0.1mm increments ranging from 1.1 to 2mm...
Model: YT-0242BK
Description:Neatly manage your 1/10 setup system on your pit table with this setup system organizer and parts tray! Specific designed slots for you to place your setup system and toe in plate and extra slots for small parts...
Model: YT-0055BK
Description:The Yeah Racing Aluminum Ride Height Droop Gauge for standard RC touring car.Providing the measurements for the height of the car chassis and the suspension droop. The marks on the gauge were laser marked which can not be discolored. The measurement for the height of the car chassis from..
Model: YT-0055BU
Description:The Yeah Racing Aluminum Ride Height Droop Gauge for standard RC touring car. Providing the measurements for the height of the car chassis and the suspension droop. The marks on the gauge were laser marked which can not be discolored. The measurement for the height of the car chassis fro..
Model: YT-0056BK
Description:This is the Yeah Racing 3 in 1 Camber Gauge (BK) for all 1/8 & 1/10 on road car...
Model: YT-0056BU
Description:This is the Yeah Racing 3 in 1 Camber Gauge (BU) for all 1/8 & 1/10 on road car...
Model: YT-0209
Description:Multi sized hex driver containing 4 hex tips from 1.5mm to 3.0mm in 0.5mm increments. The hex tips are stored inside the handle cap, for easy tip management and storage so that there is a less chance for losing them. Magnetised tips for easy screw pickup...
Model: YT-0106BK
Description:This is the 4-In-1 Multi-Purposes Alloy Turnbuckle Turner (BK)...
Model: YT-0234BK
Description:0.5mm Stepped Droop Measuring gauge for 1/8 Onroad cars for a ultra fine measurement for droop!..
Model: YT-0235BK
Aluminum droop blocks for use with 1/8 Onroad droop gauge #YT-023K. Low surface area to avoid hitting chassis screws...
Model: YT-0241BK
Easily mount your 1/28 scale micro racer tires with this tire mounting rig! Tool specially designed to pair along with 20mm wheels, with a tape cutting marking to cut tape exact to rims!..
Model: YT-0237BK
Slim profile screw and parts tray for you to organise your pit table. Magnetic slot at the very bottom to prevent those extra small parts from going missing!..
Model: YT-0205BK
DescriptionEasily mark the wheel well on your 1/8 GT and 1/8 on-road race cars! The smallest marking is designed for the front tire (68mm), the 76mm for the rear tires. The outermost 105mm marking is designed for 1/8 GT cars!..
Model: YT-0218
Description:With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox!..
Model: YT-0183
Yeah Racing Aluminum 1.5mm Allen Hex Driver Tool Black Gold #YT-0183Description:With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox!..
Model: YT-0184
Yeah Racing Aluminum 2.0mm Allen Hex Driver Tool Black Gold #YT-0184Description:With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox!..
Model: YT-0185
Description:With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox!..
Model: YT-0186
Description:With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox!..
Model: YT-0224
Description:
Full set of Lock Nut Drivers for building and/or repairing your rig! Includes sizes to build a vast majority of cars on the market.
..
Model: YT-0219
Description:With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox!..
Model: YT-0250BK/GD
Description:4.5mm locknut driver with a shallowed tip for easier installations so your locknut doesn't fall too far into the shaft!..
Model: YT-0226
Aluminum nut driver for removing 5mm locknuts, black/gold coloring to match other Xtra Speed tool accessories!..
Model: YT-0191
Description:With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox!..
Model: YT-0206BK
Description:
Never have rough looking cut body posts again with this body post cutter! Loosen the knob at the end and make sure the little ball is backed off as well then insert your knife and start tightening the knob! In no time you will have very clean cut body posts on your car! The fun doesn't ..
Model: YT-0192
Description:With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox!..
Model: YT-0197BK
Description:Yeah Racing multi size turnbuckle wrench, adjust most major turnbuckle sizes with this simple yet effective tool. Width is just right so you can shorten turnbuckles to their shortest size whilst retaining enough "meat" on the tool to be able to grip the turnbuckle as much as possible...
Model: YT-0197BU
Description:Yeah Racing multi size turnbuckle wrench, adjust most major turnbuckle sizes with this simple yet effective tool. Width is just right so you can shorten turnbuckles to their shortest size whilst retaining enough "meat" on the tool to be able to grip the turnbuckle as much as possible...
Model: YT-0197RD
Description:Yeah Racing multi size turnbuckle wrench, adjust most major turnbuckle sizes with this simple yet effective tool. Width is just right so you can shorten turnbuckles to their shortest size whilst retaining enough "meat" on the tool to be able to grip the turnbuckle as much as possible...
Model: YT-0223
Description:With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox!..
Model: YT-0189
Description:Easily work on your 1/10 Crawler with this aluminum car stand. Swivel tube design allows you to rotate the crawler and work on it from multiple angles! Comes with foam tape which prevents the crawler from slipping around whilst ontop of the stand!..
Model: YT-0190
Description:Easily make fixes to your car or install upgrades with this car stand! Soft sponge on the top part so your car doesn't slide off...
Model: YT-0135BK
Description:A perfect tool for removing stubborn ball ends with minimum efforts as well as wears on the ball ends. With this tool, you will need only a second to remove ball ends which make it a life saver when you are need a quick fix on the track-side. A must have item for any racers...
Model: YT-0135BU
Description:A perfect tool for removing stubborn ball ends with minimum efforts as well as wears on the ball ends. With this tool, you will need only a second to remove ball ends which make it a life saver when you are need a quick fix on the track-side. A must have item for any racers...
Model: YT-0074BU
Description:This is Yeah Racing Aluminum Bearing and Motor Bearing Inner Size Measurer and Tester For 2-15mm.It can measure different bearing dimension, from 2mm - 15mm. As well as motor bearing, with dimension 3.18mm...
Model: YT-0244BK
Aluminum high pressure bearing cleaner for all different sizes of bearings! Use with cans of pressurised cleaners with or without the cap for easier access...
Model: YT-0178BK
Description:Open body mount holes with ease with this steel tip body reamer with an aluminum handle whilst giving you a good grip and keeping the weight down whilst carrying it around. Open holes up to 14mm big with this reamer!..
Model: YT-0178BU
Description:Open body mount holes with ease with this steel tip body reamer with an aluminum handle whilst giving you a good grip and keeping the weight down whilst carrying it around. Open holes up to 14mm big with this reamer!..
Model: YT-0178OR
Description:Open body mount holes with ease with this steel tip body reamer with an aluminum handle whilst giving you a good grip and keeping the weight down whilst carrying it around. Open holes up to 14mm big with this reamer!..
Model: YT-0222BK
Description:Multifunctional car stand for working on your Mini-Z or any 1/28 scale micro rc car. In-Built holes to hold diffs when rebuilding and pre marked areas for measuring the diameter of your tires...
Model: YT-0239BK
Description:Check the balance of your chassis with these Aluminum Balancing tools, line these tools up with the measuring holes on your chassis plate...
Model: YT-0175
Description:Setup your 1/28 Racer with ease with this Tool Set! Comes with all the tools you would see used to setup 1/10 Touring Cars, comes with enough tools for you to setup the Droop, Rideheight and Camber...
Model: YA-0524BK
Description:Gone are the days of messy damper rebuilds with this Damper Holder, neatly place your dampers into the holes and with the same plate top and bottom the space used by this holder is limited so you don't knock it over. Also able to place gear differentials in the center hole..
Model: YA-0524BU
Description:Gone are the days of messy damper rebuilds with this Damper Holder, neatly place your dampers into the holes and with the same plate top and bottom the space used by this holder is limited so you don't knock it over. Also able to place gear differentials in the center hole..
Model: YT-0187
Description:With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox!This set comes with the most used four sizes, so you can buy this set not having to worry not having the rig..
Model: YT-0238BK/GD
Description:Neatly sort your pit space with this tool stand with three separate compartments to store small parts such as screws and bodyclips! Combo set comes with all popular tool sizes for you to wrench on your car!..
Model: YT-0248BK/GD
Description:Imperial unit hex drivers for building or working on your rc cars, includes sized found in Team Associated's RC10!..
Model: YT-0249BK/GD
Description:Imperial unit nut drivers for building or working on your rc cars, includes sized found in Team Associated's RC10!..
Model: YT-0217BK
Description:Organize your pit table neatly with this Mini-Z Multi Function Tool Stand! House not only your tools, but also your tires, batteries, and more! Featuring a magnetic compartment for you to stick body clips to it...
Model: YT-0243BK
Aluminum multi function shock pliers for adjusting and building your dampers! Features different cutouts for a large variety of tasks, such as holding onto shock shafts (7mm length min.), shock body and even building turnbuckles! ..
Model: YT-0243RD
Aluminum multi function shock pliers for adjusting and building your dampers! Features different cutouts for a large variety of tasks, such as holding onto shock shafts (7mm length min.), shock body and even building turnbuckles! ..
Model: YT-0243BU
Aluminum multi function shock pliers for adjusting and building your dampers! Features different cutouts for a large variety of tasks, such as holding onto shock shafts (7mm length min.), shock body and even building turnbuckles! ..
Model: YT-0243PP
Aluminum multi function shock pliers for adjusting and building your dampers! Features different cutouts for a large variety of tasks, such as holding onto shock shafts (7mm length min.), shock body and even building turnbuckles! ..
Model: YA-0571BK
Description:Keep your screws and small parts neatly and organised with this three compartment Aluminum Parts Tray! Banana plug compartment to help you solder plugs and two separate holes at the bottom for securing gear differentials during maintenance!..
Model: YT-0225BK
Description:Accurately measure the downstop across all your cars with this downstop gauge which allows you to measure your axle height from the bottom of your chassis! If that is not to your liking, the traditional height from the bottom of the arm can still be measured with the measurements on the ..
Model: YT-0145
Description:Screwdriver kit that includes the most used sizes for R/C, perfect for those outdoor RC adventures. Included is an aluminum carrying case so that you will not lose the screwdriver bits and will second as a good protection for the handle! The handle and case being aluminum makes this kit ..
Model: YT-0142BU
Description:Setup your M-Chassis car with precision by using these setup wheels! By using these M-Chassis setup wheels you will be sure that the geometry will be as per racing conditions so you will get the most accurate readings possible! Used to measure camber and other things. Also comes with set..
Model: YT-0142RD
Description:Setup your M-Chassis car with precision by using these setup wheels! By using these M-Chassis setup wheels you will be sure that the geometry will be as per racing conditions so you will get the most accurate readings possible! Used to measure camber and other things. Also comes with set..
Model: YT-0069BK
Description:These are the Yeah Racing Aluminum Mini Set Up Wheels for 1/10 touring cars. 25% lighter than standard set up wheels! It eliminates errors from using standard rubber or foam tires. A perfect set up tool for precise, repeatable set-up adjustment and tweak correction!..
Model: YT-0069BU
Description:These are the Yeah Racing Aluminum Mini Set Up Wheels for 1/10 touring cars. 25% lighter than standard set up wheels! It eliminates errors from using standard rubber or foam tires. A perfect set up tool for precise, repeatable set-up adjustment and tweak correction!..
